Fin Meeting Table

A slimline meeting and conference table built around one idea: a leg frame worth looking at twice. Fin’s elliptical steel legs look different from every angle, slender from one side and sculptural from another, while the top stays clean and simple. Choose from five top finishes, from hard-wearing MFC to real oak or walnut veneer with a solid wood “wing” edge. Then add a black or champagne frame in one of two heights. It’s a modular, linear table for meeting rooms, conference spaces and boardrooms.

Key benefits:

Elliptical steel leg frame that changes profile as you move around the room
Five top finishes, including real wood veneer with solid oak or walnut lipping
Black or champagne frame, with two frame heights
Modular, linear design that scales from a small meeting room to a full boardroom
Concealed height levellers are built into each foot

We offer large project discounts. Get in touch

Care information

helping reduce staining

Upholstery:

Fabrics are extremely delicate; therefore, it is very important to carefully review the suggested wash and pay attention when using them, as they can be ripped or cut. We provide wear guarantees from our partners, who manufacture textiles and leather; however, without proper care and attention, they can look old and dirty well before their time. In extreme cases, they could even wear through and a hole might appear. If you care about your fabric and leather in the workplace and contract interiors, following a few simple rules can add years to their wear life and appearance, making them the most visually appealing element of furniture.

Wool and Viscose:

Vacuum your fabrics regularly to prevent dust and dirt from building up on the surface. Quickly react to spilt liquids and fresh stains. Mop up the excess liquid using a kitchen roll or a damp cloth. Then clean using a shampoo, detergent, or hand wash. Always use a branded shampoo for upholstered fabrics. Alternatively, both wool and polyester can be dry cleaned. For areas with spills or stains, a stain-repellent finish can be applied to certain fabrics, reducing stains. Alternatively, choose a wipe-down upholstery solution.

Leather:

Leathers are extremely delicate; therefore, it is very important to carefully review the suggested wash and pay attention when using them, as they can be ripped or cut. Exposing in spaces with a high humidity level might cause structural damage. Never use detergents on solvent-based or acetone-based cleaners. Clean with a soft cloth with warm water. Do not wash leather in the washing machine, dry it in the dryer, do not bleach it, iron it, or dry-clean it.

Wood:

Wipe the product with a dry, lint-free cloth. Dirty surfaces should be cleaned with a damp cotton cloth or neutral detergent, preferably diluted in water, and then wiped dry with a dry cloth. Water should be used sparingly. If liquid does not spill on the product, wipe it off immediately; it could be absorbed. Do not place hot objects directly on the surface; use coasters. Products should not be placed near heat sources, such as radiators or fireplaces. If the surface treated with oil becomes dry, maintenance oil may be applied.

Delivery and Shipping

As each of our products is made to order and specification, lead times vary between products. Please contact us for more details.

Description

A meeting table with quiet confidence

Most meeting tables fall into two camps. Some are purely practical and forgettable. Others are statement pieces that take over the room. Fin sits between the two. Its slim top and simple lines keep the room calm, and the leg frame adds the detail that makes people notice.

The frame is made from elliptical steel tube. Because the tube is oval rather than round, the leg looks different depending on where you stand. Walk into the room and the legs read as fine, almost blade-like lines. Sit down at the side and they become broader, more architectural shapes. The profile changes, but the lines always stay clean.

Five top finishes to suit the room and the budget

Fin is specified to match how the room will be used, not just how it should look.

MFC with a square edge is the practical choice for busy meeting rooms, training spaces and project rooms. It’s available in eleven colours, from light oak, maple and ice white through to graphite and black.

High-pressure laminate with a chamfered edge adds a sharper, more tailored look and a harder-wearing surface. It comes in ice white, powder blue, pastel green or black, so you can use calm neutrals or a soft accent colour that ties into your brand.

Real wood veneer with a chamfered edge brings natural grain in oak or natural walnut. It suits client-facing meeting rooms and boardrooms where the table is part of the first impression.

HP laminate with a solid wood “wing” edge combines a durable laminate surface with a softly shaped solid oak or walnut edge. You get the warmth of timber where hands and arms rest, on a surface built for daily use.

Nano laminate is offered in ice white or black.

Black or champagne frame

The frame comes in black or champagne. Black gives a crisp, graphic look against pale tops and works well in contemporary and industrial interiors. Champagne is a soft metallic that warms up walnut and oak and sits well in boardrooms and premium client spaces. Two frame heights are available.

Modular meeting and conference tables

Fin is modular and linear, so the range grows with the room. Use a single table for a four-to-six-person meeting room, or run tables together for a longer conference or boardroom layout. The same frame, edge, and finish run throughout the whole range, maintaining a consistent look across every meeting space in the building.

Details you’ll appreciate later

Each leg frame has height levellers hidden inside the foot. Uneven floors are common in older buildings and on raised access floors, and the levellers let the table sit flat and stable without visible adjusters spoiling the line of the leg.

Where Fin works best

Meeting rooms: a calm, uncluttered table that doesn’t dominate a smaller space
Conference rooms: linear modules for longer layouts

Boardrooms: veneer or wing-edge tops with a champagne frame for a premium finish
Client suites and breakout meeting areas: a table that looks considered from every angle
Specify Fin with Furnify

Furnify has supplied and installed commercial office furniture since 2016, with more than 500 installations completed. We can help you choose the right size, finish and frame for your space, and our own installation team handles delivery and fitting. Get in touch for a quote or finish samples.

Technical Specifications

Choose from the following tabletop finishes:

25mm particleboard core with an MFC finish with ABS square edge lipping

MFC Finishes include: Oak, Beech, Maple, Walnut, Natural Cherry, Forest Oak, Dove Grey, Lead, Graphite, Black or Ice White

25mm MDF core with high-pressure laminate finish, with solid wood lipping and a rounded ‘wing’ chamfer edge profile

Standard laminate finishes available: Ice White, Powder Blue, Pastel Green or Black

A 25mm MDF core with a real wood veneer or nanolaminate finish, solid wood lipping, and a rounded ‘wing’ chamfer edge profile.

Standard veneer finishes available: Oak or Natural Walnut

Dimensions

All sizes are in mm:

Circular Table Sizes:

One Piece top 1200 diam x 740
One Piece top 1500 diam x 740
Two Piece top 1800 diam x 740

Rectangular Table Sizes:

One piece top - long grain

1600 x 800 x 740
1800 x 800 x 740
2000 x 1000 x 740
2400 x 1200 x 740

Two-piece - long grain

2800 x 1200 x 740
3600 x 1400 x 740
4400 x 1400 x 740

Three-piece - cross-grain

3600 x 1800 x 740

Four-piece - cross-grain

4800 x 1800 x 740